Proudly serving Wesley Chapel, New Tampa and surrounding areas.

Baby, It's Cold Outside: How to Bleed Air from Baseboard Heating Systems & the Most Popular Heating Systems Maintenance

Last updated: 12-25-2020

Read original article here

Baby, It's Cold Outside: How to Bleed Air from Baseboard Heating Systems & the Most Popular Heating Systems Maintenance

​Heating is no joking matter. A cold winter's night can be unpleasant at best, and rather than suffering through with blanket forts and warm tea (if you have a gas stove), complete the proper maintenance to a) keep your heating system working and b) save money on your utility bill. The first step in keeping your heating system working is knowing which type of system you have, and most likely, it's one of the usual suspects.

Home Pro Tip: If you're at all concerned about maintaining your home heating system, it's best to contact a heating or HVAC professional. They'll be able to help you know more about your system and perform routine maintenance. If you have a home warranty, then schedule an appointment through your home warranty company. If you are DIY savvy, then continue on! 

More often than not, you'll find a furnace or a boiler in your basement. We won't bore you with the details, but furnaces heat air and push it into your favorite sections of your home. Boilers heat water (hence, "boil") and distribute steam via radiators or hot water via pipes in baseboards or radiant floor panels. If you're unlucky in this department, you might have a steam boiler in this basement, and this less-than-desirable option operates at a higher temperature than hot water boilers and is less efficient. 

​Furnaces and boilers require bi-annual maintenance or they get a bit cranky, which means less heat, higher utility bills, and potentially cold toes. Rather than putting on a second pair of socks, complete these quick checks (or hire a heating professional) to keep your furnace or boiler delivering the heat you want, when you want it. Clear areas around vents, hot water baseboard heaters, and radiators to prevent fires and keep air flowing. Check air ducts and heating pipes to ensure they are properly sealed for maximum airflow. Inspect all gas, oil, and electrical connections, including gas pressure, burner combustion, heat exchange, and motor voltage. Issues with any of these areas can lead to safety concerns, efficiency loss, and higher bills. (Consider hiring a heating professional for this step.) Lubricate moving parts, so they do not cause friction, which would shorten the life of the system and increase the amount of electricity you use. Make sure the condensate drain in the central air conditioner, furnace, or heat pump is clear as a clogged drain can cause water damage and raise indoor humidity levels.

 When you hear "central air," you might actually be hearing "forced air systems." These systems pull air in from the outside, pass it through a filter to remove allergens, and then push it through ducts. During the summer, you get cool air. During the winter, you get warm air.

​Overall, forced air systems are low maintenance and deliver heat efficiently. They even offer modern options, like new high-efficiency pleated filters that have an electrostatic charge to grab the tiniest particles including those that carry bacteria. Stay warm, safe, and healthy with this system by checking off a few quick items: See when your air filters need to be changed and do so on schedule. Some forced air filters require a cleaning/replacement every three months. (vipHomeLink's digital home management app can help in this area by sending you personalized reminders to check and clean your filters.) Ensure the area around the system is free of debris with at least two feet of clearance. Clean the condenser coils at least once a year, which can increase your energy efficiency and decrease your consumption. Clean the vents and registers annually for good circulation.

It's electric - boogie woogie woogie! Electric baseboard heating are units attached to the baseboard that pull cool air in the bottom and push hot air out the top. There's not much more to it than that, though they are expensive, inefficient, and heat only sections of your house.

If you have one pipe leading to a cast iron radiator and you hear a high-pitched whistling, then you probably have a steam radiant heating system. (You also probably live in a house built in the 19th century that hasn't been renovated or upgraded. Very trendy but not as safe as it should be.) Steam units use a boiler to heat up water and create steam heat, which travels through the pipes to your radiator. As the steam cools, it condenses back into water and returns to your boiler to restart the process.

Checking your system is always important, no matter what type of heating system your house has. However, it's extremely necessary with steam systems, which are old hot water heating systems and need more TLC than newer units. Here's some must-do maintenance to add to your list: That whistle we mentioned? It might meanyour system needs servicing. Bleed the baseboard heater. Bleeding air from hot water radiators allows hot water to move freely through the pipes. This may be easier said than done as bleeding radiators involves using a key that fits into the bleeder valves on the end of the radiator. Insert the key, open the valve, and turn until water drips out, which also releases the trapped air. Clean radiator air vents to ensure they are working properly. These vents are located halfway down the side of each radiator. Check your radiators and pipes for cracks or leaks. A small drip can lead to a big problem if left unattended. Examine the pipes around the boiler for similar issues. CAUTION: Never touch any hot water pipes. Steam radiant systems usually require additional maintenance on the steam boiler including draining, feeding, and overall servicing by a professional. Consider upgrading when financially feasible to a safer, more efficient, and more environmentally-friendly system. 

​Maintaining your heating system can be difficult, but with vipHomeLink, it doesn't have to be. Our home management app reminds members to change their filters, clean their radiator air vents, and to keep the area debris-free. In the unfortunate event that your heating system doesn't work, vipHomelink stores all your critical home information, including your model number and heating system info, so you'll have it ready for your HVAC professional. Make sure to stay safe and warm this winter with home maintenance tips from vipHomeLink. Not a member? Try our home management app with a risk-free, 90-day trial now! 

Any offers that appear on the vipHomeLink site, in our content, vipTIPs or other recommendations are for the convenience and benefit of our users. vipHomeLink may receive compensation from any purchases that are made by our users. This compensation is paid by the seller and will not impact the prices that are offered. This compensation arrangement may impact which offers appear and which sellers are featured on our site. If you elect to use or purchase services from third parties, you are subject to the third parties' review of your information and to their terms and conditions and privacy policy. vipHomeLink does not endorse, warrant or guarantee the products or services available through the vipHomeLink offers (or any other third-party products or services advertised on or linked from our site), whether or not sponsored.

Read the rest of this article here